Template:Pagetype/doc

This is a documentation subpage for Template:Terminate sentence
It may contain usage information, categories and other content that is not part of the original template page.

This template is used on approximately 15,300,000 pages, or roughly 565410% of all pages.
To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them.

This template uses Lua:

Module:Pagetype

This template is used to detect the page type of a given page. It detects redirect pages automatically and is highly customisable. It can be used on its own or as a meta-template to create other page-type-detection templates.

Syntax

Basic code

{{pagetype}}

Full code

{{pagetype
| page              = 
| defaultns         = 
| main              = 
| user              = 
| wikipedia         = 
| project           = 
| wp                = 
| file              = 
| image             = 
| mediawiki         = 
| template          = 
| help              = 
| category          = 
| portal            = 
| timedtext         = 
| module            = 
| special           = 
| media             = 
| talk              = 
| redirect          = 
| dab               = 
| na                = 
| other             = 
| plural            = 
}}

Basic usage

For simple detection of the page type of the current page, use the default settings:

{{pagetype}}

That will produce the following results, depending on the page type or the namespace:

Page type / namespace	Output
Redirects (in any namespace)	`redirect`
Main namespace	`article`
File namespace	`file`
Template namespace	`template`
Category namespace	`category`
Module namespace	`module`
Other namespaces	`page`

If the template is used on a talk page, it will detect the page type for the corresponding subject page.

Example

Code	Result
`{{pagetype}}`	template

Page parameter

You can use the page parameter to make the template act as though it was called from that page.

{{pagetype|page=page name}}

Examples

Code	Result
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=UK}}`	article
`{{pagetype\|page=Talk:United Kingdom}}`	article
`{{pagetype\|page=File:Example.svg}}`	file
`{{pagetype\|page=Wikipedia:Namespace}}`	article
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt}}`	article

Adding and removing namespaces

It is possible to specify different behaviour for each namespace than that described in the basic usage section. For example, you might want the template to display "user page" for pages in the user namespace, instead of the default "page". To do this, you can use the code |user=yes. This looks up the typical name used for pages in the user namespace, in this case "user page", and uses that text when the template is used with a page in the user namespace. To use this with other namespaces, use the namespace name in lower case as a parameter:

{{pagetype
| user              = yes
| wikipedia         = yes
| project           = yes
| wp                = yes
| mediawiki         = yes
| help              = yes
| portal            = yes
| timedtext         = yes
| special           = yes
| media             = yes
}}

You can use any of the following to specify the namespace: "yes", "y", "true" or "1". They can be used in any combination of upper and lower case. (These values are defined by Module:Yesno.)

The default text for these namespaces is as follows:

Page type / namespace	Output
User namespace	`user page`
Wikipedia namespace	`project page`
MediaWiki namespace	`interface page`
Help namespace	`help page`
Portal namespace	`portal`
Timed Text namespace	`Timed Text page`
Special namespace	`special page`
Media namespace	`file`

You can use a similar process to remove any of the default namespace values as well. For example, if you use the code |template=no, then the template will display "page" when used on a template page, rather than the default "template".

{{pagetype
| main     = no
| file     = no
| template = no
| category = no
| module   = no
}}

The following values will all work to remove namespace values: "no", "n", "false" or "0". They can be used in any combination of upper and lower case.

Examples

Code	Result
`{{pagetype\|page=Wikipedia:Namespace}}`	article
`{{pagetype\|page=Wikipedia:Namespace\|wikipedia=yes}}`	article
`{{pagetype\|page=Talk:United Kingdom}}`	article
`{{pagetype\|page=Talk:United Kingdom\|talk=y}}`	talk page
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|main=no}}`	page
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt}}`	article
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt\|timedtext=Yes}}`	article

Default namespace sets

As well as adding and removing individual namespaces, it is possible to specify different sets of namespaces by using the |defaultns=. There are four different sets available: all, extended, none and the default set. These sets allow you to specify many namespaces at once, without having to use all of the individual namespace parameters. Namespaces are set according to the following table:

Namespace	Value of `\|defaultns=`				Output
Namespace	`none`	`extended`	`all`	Other values	Output
Main	N	Y	Y	Y	article
User	N	Y	Y	N	user page
Wikipedia	N	Y	Y	N	project page
File	N	Y	Y	Y	file
MediaWiki	N	Y	Y	N	interface page
Template	N	Y	Y	Y	template
Help	N	Y	Y	N	help page
Category	N	Y	Y	Y	category
Portal	N	Y	Y	N	portal
TimedText	N	N	Y	N	Timed Text page
Module	N	Y	Y	Y	module
All talk namespaces	N	N	Y	N	talk page
Special	N	N	Y	N	special page
Media	N	N	Y	N	file

Examples

Code	Result
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|defaultns=none}}`	page
`{{pagetype\|page=Talk:United Kingdom}}`	article
`{{pagetype\|page=Talk:United Kingdom\|defaultns=all}}`	talk page
`{{pagetype\|page=File:Example.svg}}`	file
`{{pagetype\|page=File:Example.svg\|defaultns=none}}`	page
`{{pagetype\|page=Wikipedia:Namespace}}`	article
`{{pagetype\|page=Wikipedia:Namespace\|defaultns=extended}}`	article
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt\|defaultns=extended}}`	article
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt\|defaultns=all}}`	article

Custom namespace values

It is possible to specify a custom value for any namespace:

{{pagetype
| main              = custom text
| user              = custom text
| wikipedia         = custom text
| project           = custom text
| wp                = custom text
| file              = custom text
| image             = custom text
| mediawiki         = custom text
| template          = custom text
| help              = custom text
| category          = custom text
| portal            = custom text
| timedtext         = custom text
| module            = custom text
| special           = custom text
| media             = custom text
}}

Examples

Code	Result
`{{pagetype\|page=Wikipedia:Namespace}}`	article
`{{pagetype\|page=Wikipedia:Namespace\|wikipedia=custom text}}`	article
`{{pagetype\|page=Talk:United Kingdom}}`	article
`{{pagetype\|page=Talk:United Kingdom\|talk=custom text}}`	custom text
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|main=custom text}}`	custom text
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt}}`	article
`{{pagetype\|page=TimedText:Imagine.ogg.en.srt\|timedtext=custom text}}`	article

Talk parameter

Normally, the template will treat talk pages as if they were in the corresponding subject namespace. However, if the talk parameter is set, the template will treat talk pages separately from subject pages. The talk parameter sets values for all talk pages, i.e. pages in the Talk: namespace, pages in the User talk: namespace, pages in the Wikipedia talk: namespace, and so on.

{{pagetype|talk=yes}}

{{pagetype|talk=custom text}}

The default value for "talk=yes" is "talk page".

Examples

Code	Result
`{{pagetype\|page=Wikipedia talk:Namespace}}`	article
`{{pagetype\|page=Wikipedia talk:Namespace\|wikipedia=yes}}`	article
`{{pagetype\|page=Wikipedia talk:Namespace\|talk=yes}}`	article
`{{pagetype\|page=Wikipedia talk:Namespace\|wikipedia=yes\|talk=yes}}`	article
`{{pagetype\|page=Wikipedia talk:Namespace\|talk=custom text}}`	article
`{{pagetype\|page=Wikipedia talk:Namespace\|wikipedia=yes\|talk=custom text}}`	article

Main namespace classes

For pages in the main namespace, it is possible to add a class value in the first positional parameter:

{{pagetype|class}}

If the class value matches one of the values in the table below, it will produce an alternative to the default output of article.

Class	Class values	Output
Disambiguation page	`disambiguation`, `disambig`, `disamb`, `dab`	`page`
No applicable class	`na`, `n/a`	`page`

You can input the class value in any combination of upper and lower case.

Custom main namespace classes

It is also possible to specify a custom value for the main namespace classes:

{{pagetype|class|dab=yes|na=yes}}

{{pagetype|class|dab=custom text|na=custom text}}

This works the same way that it does for the custom namespace page types. Possible parameters are:

dab: a custom value for disambiguation-class pages. If set to "yes", "y", "true" or "1", this produces "disambiguation page". If set to "no", "n", "false" or "0", no custom value is produced. If set to any other value it produces that text.
na: a custom value for NA-class pages. It works in the same way as the dab parameter. The default value for "yes" etc. is "page".

Examples

Code	Result
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|dab}}`	page
`{{pagetype\|page=United Kingdom\|dab\|dab=custom text}}`	custom text
`{{pagetype\|page=United Kingdom\|na}}`	page
`{{pagetype\|page=United Kingdom\|na\|na=custom text}}`	custom text

Redirects

By default, the template automatically detects redirects in all namespace. It is not possible to specify redirect behaviour by namespace, but you can turn redirect detection off, or use a custom value for redirect pages.

{{pagetype|redirect=no}}

{{pagetype|redirect=custom text}}

Examples

Code	Result
`{{pagetype\|page=UK}}`	article
`{{pagetype\|page=UK\|redirect=no}}`	article
`{{pagetype\|page=UK\|redirect=custom text}}`	article

Other namespaces

By default, the template produces "page" if used from a namespace that hasn't been specified. This value can be changed with the |other= parameter:

{{pagetype|other=custom text}}

Examples

Code	Result
`{{pagetype\|page=Wikipedia:Namespace}}`	article
`{{pagetype\|page=Wikipedia:Namespace\|other=custom text}}`	article
`{{pagetype\|page=Wikipedia:Namespace\|other=custom text\|wikipedia=wikipedia-space text}}`	article

Plurals

By default the module returns the name of the namespace in the singular. Adding the parameter |plural=y returns the plural form.

Code	Result
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|plural=y}}`	articles
`{{pagetype\|page=Category:Books}}`	category
`{{pagetype\|page=Category:Books\|plural=y}}`	categories

The rules for pluralisation can be customised in Module:Pagetype/config to allow localisation.

Capitalisation

By default the module returns the page type in lowercase. Adding the parameter |caps=y returns a version with a capital letter at the start.

Code	Result
`{{pagetype\|page=United Kingdom}}`	article
`{{pagetype\|page=United Kingdom\|caps=y}}`	Article
`{{pagetype\|page=United Kingdom\|plural=y\|caps=y}}`	Articles

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Pagetype in articles based on its TemplateData.

TemplateData for Pagetype

This template Identifies the type of a given page. It is highly customisable. By default it detects redirects, articles, files, templates, categories, and modules, and other types of page are displayed as "page".

Template parameters
Parameter		Description	Type	Status
Class	`1`	Class is used to distinguish between different non-article pages in mainspace. 'disambig', 'disamb', 'dab', 'na' and 'n/a' give "page". The values can be customised with the "dab" and "na" parameters.	String	optional
Page name	`page`	The name of the page to detect the type of. Defaults to the current subject page, or to the current page if the "talk" parameter is activated.	Page name	optional
Main namespace	`main`	Adjust output for the main namespace. Use "yes" to enable with the output "article", "no" to disable, and other text to enable with custom output. Enabled by default.	String	optional
User namespace	`user`	Adjust output for the User namespace. Use "yes" to enable with the output "user page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Wikipedia namespace	`wikipedia` `project` `wp`	Adjust output for the Wikipedia namespace. Use "yes" to enable with the output "project page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
File namespace	`file` `image`	Adjust output for the File namespace. Use "yes" to enable with the output "file", "no" to disable, and other text to enable with custom output. Enabled by default.	String	optional
MediaWiki namespace	`mediawiki`	Adjust output for the MediaWiki namespace. Use "yes" to enable with the output "interface page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Template namespace	`template`	Adjust output for the Template namespace. Use "yes" to enable with the output "template", "no" to disable, and other text to enable with custom output. Enabled by default.	String	optional
Help namespace	`help`	Adjust output for the Help namespace. Use "yes" to enable with the output "help page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Category namespace	`category`	Adjust output for the Category namespace. Use "yes" to enable with the output "category", "no" to disable, and other text to enable with custom output. Enabled by default.	String	optional
Portal namespace	`portal`	Adjust output for the Portal namespace. Use "yes" to enable with the output "portal", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
TimedText namespace	`timedtext`	Adjust output for the TimedText namespace. Use "yes" to enable with the output "Timed Text page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Module namespace	`module`	Adjust output for the Module namespace. Use "yes" to enable with the output "module", "no" to disable, and other text to enable with custom output. Enabled by default.	String	optional
Special namespace	`special`	Adjust output for the Special namespace. Use "yes" to enable with the output "special page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Media namespace	`media`	Adjust output for the Media namespace. Use "yes" to enable with the output "file", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
All talk namespaces	`talk`	Adjust output for all talk namespaces. Normally this template uses the subject page of the specified page to determine the pagetype, but if this parameter is enabled talk pages will be used as well. Use "yes" to enable with the output "talk page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Disambiguation page value	`dab`	Adjust output for pages in mainspace when the "Class" parameter has been set to "disambiguation", "disamb", or "dab". Use "yes" to enable with the output "disambiguation page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
N/A page value	`na`	Adjust output for pages in mainspace when the "Class" parameter has been set to "disambiguation", "disamb", or "dab". Use "yes" to enable with the output "page", "no" to disable, and other text to enable with custom output. Disabled by default.	String	optional
Other namespaces	`other`	By default the template outputs the text "page" if the page is in a namespace that has not been specified. This value can be changed by using this parameter.	String	optional
Set of default namespaces	`defaultns`	This parameter is used to specify the set of namespaces used by default. By default the template detects page types in the main, File, Template, Category, and Module namespaces. If this parameter is set to "none", the template doesn't detect page types in any namespaces. If it is set to "extended", the template detects page types in the main, User, Wikipedia, File, MediaWiki, Template, Help, Category, Portal, and Module namespaces. If it is set to "all", the template detects page types in all namespaces, including talk pages. The namespaces set by this parameter can be overridden by the parameters for individual namespaces.	Line	optional
Pluralise output?	`plural`	Setting this value to "true", "yes", "y" or similar will result in the output from the template being in plural form (e.g. "articles" instead of "article").	Boolean	optional
Capitalise output?	`caps`	Setting this value to "true", "yes", "y" or similar will result in the output from the template beginning with a capital letter (e.g. "Article" instead of "article").	Boolean	optional